Medium Voltage

Get a Quote Tomorrow

Medium Voltage Energy Cable


MV 5kV through 35kV power cables are used for primary power and distribution circuits in industrial, commercial, and utility installations. The versatile cable can be installed underground in wet or dry applications, in cable tray sizes 1/0 & larger, and in duct, open air, and direct burial applications.

Find Your Rep

Medium Voltage Line-Up

TR-XLPE/CN/LLDPE, MV-90 Type Primary UD
EPR/CN/LLDPE, MV-90 Type Primary UD
EPR/CTS/PVC Power, Type MV-105
EPR/CTS/PVC Power, Type MV-105, 3 Conductor


NEW! EZ-RF Reduced Friction Coating


Run cable and wire faster with EZ-RF. This coating helps decrease pulling tension, reduces friction up 85%* and helps to ease in installing wire and cable in conduit or raceway. More

LS SureClean™ Isolator Technology

Reduce excessive particulate contamination and help cables maintain their integrity for a much longer life cycle.


Isolator technology has demonstrated its value as a proven improvement on existing technologies within industries where cleanliness standards are also critical such as pharmaceutical and food preparation, LS Cable & System USA has determined the use of isolator technology for the material handling of MV, HV and EHV cable provides the same advantages as other industries.

The isolator box has been certified as ISO 5 (Class 100). There are 100 times fewer particles than the standard ISO 7 (Class 10,000) cleanroom being used today. ISO 7 class of clean room will have 2,930 particles >= 5 µm per cubic meter.

LS Cable and System USA MV cables are created using
state-of-the-art LS SureClean™ Isolator Technology.

How does the HEPA filter work?


The HEPA filter consists of ultra-fine strands in a randomly woven material. The thickness of the fibers varies from .5 to just over 2 microns. It is this tortuous airflow that makes the HEPA filter so effective at capturing microscopic particles that may easily pass through conventional filters. When air flow is high, dirt particulates are trapped immediately as they smash into the filter fibers. Particulates that are not trapped immediately are snagged by fibers as they brush past. At lower airflow, particulates wander randomly around the filter until they become snagged by the filter fibers. These three mechanisms make HEPA filtration highly efficient at capturing particulates above its rated performance. LS Cable & System USA uses a 0.3 µm-rated HEPA filter.

True Triple Extrusion CCV Line

The process of all three extrusions in one process (True Triple) enables the cable manufacturer to produce high-quality cables guaranteeing precise dimensional tolerances and meeting all customer specifications.

When compared with tandem single (1+1+1) and dual extrusion (1+2) systems, True Triple extrusion significantly reduces the possibility of foreign material particulates entering the three insulation layers reducing the incidence of voltage failures and partial discharge failures providing a better quality cable.


                                             0.5 mile-long CCV Line

Quality Assurance through In-House Testing

LS Cable & System USA utilizes an in-house testing laboratory capable of performing electrical testing for all medium voltage cable products: Maximum Test Voltage 160kV-Partial Discharge Analysis-AC Withstand Test (Hi-Pot)-Certified Test Reports (CTRs).


Through each step of the manufacturing process, LS Cable & System USA's Tarboro, NC plant monitors every step of the manufacturing process to ensure the finished product meets or exceeds industry standards.

Why Choose LS Cable & System USA

  • Global Top Tier

    With extensive experience and product line competitiveness, the company provides total solutions for each application to satisfy the needs of its clients. Using its expertise in the global energy distribution market, the company has executed projects in 50 countries worldwide in America, Asia and the Middle East.

  • Full Line Solutions

    LS Cable & System USA is the only global company that provides a full line-up of energy distribution products, from low to high voltage and from low to high capacity, to satisfy every need of its clients and provide an optimized solution for each project.

  • Customer Support

    Our engineer team will guide clients from the initial period in order to produce the best system providing full support in design, production, installation, and testing to satisfy our clients.

Share by: